Beam Launcher Truss Type 600Ton Double Beam Bridge Launching Crane
Nybon Machinery is a leader in providing overhead crane/bridge crane,gantry crane,jib cranes,ship cranes,electric winches,hydraulic winches,diesel winches,electric hoist and relative components for shipyard,automotive,material handling, specialty machinery, and workshop solutions. Our diverse portfolio also includes a wide range of lifting products for industrial, commercial and specialty applications.
What is a Beam Launcher?
The bridge erection machine-also called a beam launcher or truss type bridge launching crane, is a device that places the prefabricated beams on the prefabricated piers. The bridge erection machine belongs to the category of cranes, because its main function is to lift the beam pieces, then transport them to the position and put them down.
ajor components of Nybon Bridge Lauching Cranes—Bridge construction machinery that runs on roads and railway tracks and is used to erect small-span beams across the entire span. Because of its high efficiency of bridging, in the standard design of railway bridges in China, it is often considered as the design principle. Its fuselage is huge and exceeds the limit of railway transportation. It must be disassembled and transported. After arriving at the construction site, it will be assembled and used.
Key Features of Nybon Beam Launcher Crane
It is mainly composed of boom, No. 1 hoisting trolley, No. 2 hoisting trolley, No. 1 column, No. 2 column, No. 3 column, hydraulic system, electrical system, diesel generator set and safety protection monitoring system.
Professional Crane&Winch Supplier
There are three kinds of bridge erection machines in China, which are mostly used to erect steel bars or prestressed concrete beams in pieces.
Single girder bridge erection machine
Double cantilever bridge erection machine
Double girder bridge erection machine
Partners of Nybon Crane Group
Truss type beam launching machine.
Bridge girder erection machine merges an adaptation of a wide range of work, excellent performance, convenient operation, safety structure into a single whole. It has the steel structure of rail type precast beam hoisting rack equipment. This product can be used not only in plain construction, but also to meet the construction of mountain highway slope, small radius curved bridge, skew bridge and tunnel bridge requirements.
The bridge launching machine consists of main girder, crane, front legs, rear legs, front leg cylinder, rear leg cylinder and the transverse connection of front, middle, rear legs. The control part is composed of hydraulic system and electric control system. The bridge girder erection machine is characterized by reasonable compact structure and convenient installation, the main standard girder is connected by pin connection. The double girder structure is connected between the two frame girders by welded pipe.
| Model | BGEM50/200 | BGEM 40/160 | BGEM 40/160 | BGEM 35/100 | BGEM 30/100 |
| Lifting capacity (t) |
200 | 160 | 120 | 100 | 100 |
| applicable span (m) |
≤55 | ≤50 | ≤40 | ≤35 | ≤30 |
| applicable skew bridge angle | 0-450 | 0-450 | 0-450 | 0-450 | 0-450 |
| trolley lifting speed (m/min) |
0.8 | 0.8 | 0.8 | 1.27 | 0.8 |
| tolley longitudinal moving speed (m/min) |
4.25 | 4.25 | 4.25 | 4.25 | 4.25 |
| cart longitudinal moving speed (m/min) |
4.25 | 4.25 | 4.25 | 4.25 | 4.25 |
| cart transverse moving speed (m/min) |
2.45 | 2.45 | 2.45 | 2.45 | 2.45 |
| transportation capacity (t) |
100X2 | 80 X2 | 60X2 | 50X2 | 50X2 |
| speed of bridge transport vehicle (m/min) |
8.5 | 8.5 | 8.5 | 8.5 | 8.5 |
Bridge Crane
Grúa de puenteBridge Crane
Single-girder bridge cranes are hoisting equipment that is horizontally mounted over workshops, warehouses, and stockyards for material hoisting.Gantry Crane
Grúa pórticoGantry Crane
Gantry cranes are widely used in many industries, welcome to send a free inquiry to Nybon—info@nybonmachinery.comJib Crane
Grajo de foqueJib Crane
The jib crane device is hung on the end of the jib or on a hoisting trolley that can run along the jib.
