What is a windlass used for?

Windlass is also called anchor windlass,winch windlass.etc.The windlass is used to retract and release anchors and anchor chains. It is usually installed on the main deck of the fore and stern part of the ship for anchoring and mooring of the ship. The warping head on both sides of the gypsy can be used for line handling.

General Windlass Classification?

Most of our customers order electric windlass or hydraulic windlass from us.For some special cases,we also produce diesel windlasses,capstans,electric winches.etc .Please feel free to contact Nybon for more information.

Request a Free Inquiry

Feel free to send us an emai—info@nybonmachinery.com

Thanks to our supply chain,Nybon has a big pricing advantage over our competitors, giving our customers a bigger chance to lower their cost.

We always take quality as the first priority,our winches and windlasses have been widely tested by our customers all over the world.

Yes of course.Our R&D team can make sure we design and produce the most suitable windlasses for your project.

Yes,our engineering team will provide installation manual for any windlass or winch we produce.

Yes,we’re looking for distributors,if you’re interested,welcome to leave us a message.

Electric Windlass Combination Machine

Anchor chain diameter Φ12.5-48mm Customizable
Anchoring depth ≤82.5m Customizable
Rated load Anchor: 10-90KN Mooring:5-60KN
 Nominal speed Anchor:≥9m/min mooring ≥12m/min
Anchor chain diameter Φ16-60mm Customizable
Anchoring depth ≤85m Customizable
Rated load Anchor:9-153KN Mooring:5-80KN
 Nominal speed Anchor:≥9m/min mooring ≥12m/min

Various types of hydraulic windlass combination machines(both for anchoring&mooring function)

Diesel Windlass

A machine installed on the deck that uses the diesel engine as the power to drive the reducer to drive the transmission gear and the chain pulley to carry out anchor lifting, anchoring or mooring operations.

Anchor chain diameter Φ17.5-46mm
Anchoring depth ≤85m
Rated load 38.5-526KN
 Anchoring Load 9.5-90KN
Nominal speed Anchor:≥9m/min

Most of Nybon’s customers working in marine related industry would prefer to choose our electric windlass or hydraulic windlass(both belong to WINCH catagory).Diesel windlass are suitable for occasions where stable electricity is not easy to get or places where diesel is relatively cheap.

Electric Windlass

molinete electrico/cabrestante

Electric Windlass

Electric windlass, the windlass is installed on the main deck of the ship’s fore and stern for the ship to lift the anchor and drop the mooring cable. Electric windlasses are windlasses driven by electrical energy.

Hydraulic Windlass

molinete/cabrestante hidráulico

Hydraulic Windlass

The hydraulic windlass is also called electro-hydraulic windlass. It drives the oil pump by the electric motor, drives the motor with high-pressure oil, and then drives the transmission gear through the reducer (or no reducer) to make the windlass run.

Diesel Engine Windlass

Molinete de motor diesel

Diesel Windlass

Diesel windlass is mainly composed of diesel engine main engine and electrical starting system, worm gear box, gear box, base, wall frame, anchor chain wheel, clutch, brake, twisted pair cable drum, reducer, anchor brake, roller, etc.

Electro-hydraulic windlass galleries

High Quality Tugger Electric Windlass Winch For Sale

Loading capacity 1ton- 100 ton
Rope capacity 100-1500m
Drum single or double
Working speed 9 ~ 15 m/min
Driven type electric/hydraulic
windlass-supplier
electric windlass

Automatic Marine Windlass Machine For Sale

Loading capacity 1ton- 100 ton
Rope capacity 100-1500m
Drum single or double
Working speed 9 ~ 15 m/min
Driven type electric/hydraulic

Automatic Marine Anchoring&Mooring Winch Machine

Loading capacity 1ton- 100 ton
Rope capacity 100-2000m
Drum single or double
Working speed 8 ~ 15 m/min
Driven type electric/hydraulic
nybon-mooring-anchor-winch

Intensive Course

Lorem ipsum dolor sit amet, consectetur piscing elit. Nunc ultri auctor sapien id cursus. Aliquam maximus turpis in vehicula semp Fusce et ultrices libero, at suscipit lacus. Sed vitae fringilla nibh.

Model Chain Dia. Working load Supporting load Working speed Warping load Warping speed Motor power Overall Dimensions Weight
mm KN KN m/min   m/min KW mm T
NB-24 24 25-27 149-214 9 20 8.5 8.5/3.5 1400x1625x1050 3.3
NB-26 26 29-32 175-250 9 20 8.5 8.5/3.5 1400x1625x1050 3.3
NB-28 28 33-37 202-289 9 20 8.5 11/11/7.5 1600x1845x1150 3.8
NB-30 30 38-42 231-331 9 30 8.5 11/11/7.5 1600x1845x1150 3.8
NB-32 32 44-49 262-375 9 30 8.5 16/16/11 1775x2025x1270 4.6
NB-34 34 49-55 295-422 9 30 8.5 16/16/11 1775x2025x1270 4.6
NB-36 36 55-62 329-473 9 30 8.5 16/16/11 1775x2025x1270 4.6
NB-38 38 61-69 365-522 9 50 8.5 22/22/16 1900x2150x1350 5.2
NB-40 40 68-76 403-576 9 50 8.5 22/22/16 1900x2150x1350 5.2